Sale!

Zoom UAC-2 2-IN / 2-OUT USB 3.0 Audio Converter Interface

$575.00 $378.00

INCLUDES FREE DELIVERY AUSTRALIA WIDE VIA COURIER

SKU: FXS001 Categories: ,

Zoom UAC-2 2-IN / 2-OUT USB 3.0 Audio Converter

The Zoom UAC-2 audio interface utilizes USB 3.0 SuperSpeed technology to offer near zero latency and up to 24-bit/192 kHz resolution. The device can be connected to any USB 2.0 or 3.0 equipped computer (or Apple IPad with adaptor-sold separately) for optimal usage, quick sharing, and convenient portability.The compact and robust housing makes the interface perfect for studio and field recording of microphones and instruments, for onstage playback and audio streaming, and with its dedicated MIDI input and output connectors, it can even serve as a stable MIDI interface.

The unit features two XLR/TRS combo inputs with microphone preamps and two balanced 1/4″ outputs. Phantom power is available for use with condenser microphones. Additionally, input 1 and 2 offer a Hi-Z instrument input for guitars and bass. The headphone output has a dedicated volume control and a free Mac application is available for setting mix parameters and adding effects such as reverb and echo. The interface is bus powered, but may be powered by the optional AD-14 power adapter. The UAC-2 ships with a USB 3.0 cable and a Steinberg Cubase LE software license card.

FEATURES:
2-in/2-out USB 3.0 High-Speed audio interface
Support for recording and playback up to 24-bit/192 kHz
Ultra-low latency audio streaming (2.2ms roundtrip @ 96 kHz / 32 samples)
Two combo balanced XLR/TRS input connectors accept both mic and line-level signal
Hi-Z switches allow direct connection of electric guitar or bass
Switchable +48V phantom power
Two balanced TRS output jacks for connection to amplifiers or self-powered speakers
1/4″ headphone jack with dedicated level control
Independent gain controls and clip LEDs for each input
Large knob output volume control
Direct Monitoring switch for zero latency monitoring in mono or stereo
MIDI In and Out
Compatible with all popular DAW software, including Cubase, Logic, Garage Band, Pro Tools, Ableton Live, and others
High-performance mic preamps with up to +60dB of amplification
120dB of dynamic range
4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity
Asynchronous transfer system unaffected by computer jitter
Bus powered—no AC power required
Robust metal housing ensures roadworthiness
Works with all USB 2.0 and 3.0-equipped computers and iPads*
SPECIFICATIONS:

Connections
Input 1/2: 2 x Combo XLR/1/4″ / 6.35 mm TRS (XLR: 2 hot, TRS: Tip hot)
Instrument (Input 1 & 2): 2 x 1/4″ / 6.35 mm TRS (disables Input 1 & 2 when in use)
Output L/R: 2 x 1/4″ / 6.35 mm TRS (balanced)
Phones: 1 x 1/4″ / 6.35 mm TRS stereo phone jack
Input Gain 0 to 60 dB (1 dB steps)
Input Impedance XLR/TRS: 5 kOhms
Instrument (Hi-Z On): 1 MOhm
Maximum Input Level +12 dBu (@ 0 dBFS)
Phantom Power +48 V
Maximum Output Level TRS Output: +14 dBu at 0 dBFS
Phones: +8 dBu at 0 dBFS
Output Impedance TRS Output: 100 ohms
Phones: 30 ohms
Headphone Output Power

20 mW + 20 mW (into 32 ohm load)
Frequency Response -1.0 dB: 20 Hz to 60 kHz @ 192 kHz setting
-1.0 dB: 20 Hz to 40 kHz @ 96 kHz setting
-1.0 dB: 20 Hz to 20 kHz @ 44.1 kHz setting
Signal to Noise Ratio (SNR) 125 dB(IHF-A) @ 60 dB, 150 ohm input
Dynamic Range A/D: 118 dB typical (IHF-A)
D/A: 120 dB typical (IHF-A)
Channels of I/O Audio Channels Recording: 2
Audio Channels Playback: 2
Sampling Frequencies System: 192, 176.4, 96, 88.2, 48, 44.1 kHz
Bit Depth 24-bit
Interface USB 3.0 / 2.0
MIDI In / Out (5 pin DIN jack)
Power USB Bus Power
Optional AC Adapter: 5 VDC, 1 A (AD-14)
Power Consumption: 5 W
Dimensions 4.5 x 6.9 x 1.8″ / 11.4 x 17.6 x 4.6 cm
Weight 1.65 lb / 0.75 kg

Reviews

There are no reviews yet.

Be the first to review “Zoom UAC-2 2-IN / 2-OUT USB 3.0 Audio Converter Interface”

Your email address will not be published. Required fields are marked *